DYNAPAC CC900G DRUM ROLLER COMPACTOR
The Dynapac CC900G is a small asphalt roller with a drum width of 900 mm. This machine is equipped with a powerful petrol engine, which together with the large drum diameter and drive motors connected in series contributes to excellent accessibility and hill-climbing capacity. It’s primarily used for small-scale compaction work such as pavements, cycle paths, small roads and small parking areas. Dynapac CC900G has vibration on the front drum and a static rear drum. This machine is not CE-certified.
TECHNICAL DATA+
Masses
Max. operating mass
1300 kg
Operating mass (incl. ROPS)
1250 kg
Module mass (front/rear)
545 kg/ 705 kg
Traction
Speed range
0-8 km/h
Vertical oscillation
±13°
Theor. gradeability
35 %
Compaction
Centrifugal force
16.7 kN
Nominal amplitude
0.4 mm
Static linear load (front/rear)
6.1/ 7.9 kg/cm
Vibration frequency
70 Hz
Water tank volume
190 l
Engine
Manufacturer/Model
Honda GX630RH QYD
Type
4-stroke gasoline
Rated power, SAE J1995
14.2 kW (19 hp ) @ 3000 rpm
Fuel tank capacity
23 l
Alternative Engine
Manufacturer/Model
Loncin LC2V78F-1
Type
4-stroke gasoline
Rated power, SAE J1995
14.7 kW (20 hp ) @ 3600 rpm
Hydraulic system
Driving
Axial piston pump with variable displacement.
2 radial piston motors with constant displacement.
Vibration
Gear pump/motors with constant displacement.
Steering
Gear pump with constant displacement.
Service brake
Hydrostatic in forward and reverse lever.
Parking/
Emergency brake
Failsafe brake in both drums.
Complete your projects with our Idaho Falls, Pocatello, and Chubbuck DYNAPAC CC900G DRUM ROLLER COMPACTOR.
Please acknowledge that IER is not liable for any damages or injuries that may come from equipment rentals. IER is merely a local listing website recommending available, top-rated equipment rental companies. We do not profit from, nor are we affiliated with the recommended companies above.
Specifications
It is very important that you are properly trained when using this equipment. You are required to wear all the manufacturer's recommended safety equipment, review all safe operation manuals and decals, and observe all safety precautions when utilizing tools and operating equipment.
Operator/User assumes all responsibility for the use, care, and inspection of this equipment and your Personal Protective Equipment.
Learn More about our safety training courses
Safety Requirements
Eye Protection
Hard Hat
Safety Shoes
At IER, we work hard to be your one-stop source for next-level service and solutions. With a broad range of tools and equipment, our team has everything you need to get the job done. Availability, Reliability, and Ease. That’s The IER Promise.
Similar Products
