Engine

Rated Flywheel Power (Gross)

142.1 hp @ 2,200 rpm

Rated Horse Power (Net)

142.1 hp @ 2,200 rpm

Max. Torque (Net)

413 lbf·ft @ 1,400 rpm

‍

Hydraulic System

Main Pump: Displacement

2.69 in³/rev

Boom Speed – Up (Loaded)

5.1 s (±0.5 s)

Boom Speed – Down

4.2 s (±0.4 s)

Bucket Speed – Dump

2.6 s (±0.3 s)

Main Pump: Max. Flow Rate (each)

47.55 gal/min

Main Pump: Main Relief Pressure

3,118 psi

Total Cycle Time

11.9 s (±0.3 s)

‍

Travel System/Drive Mechanism

Travel performance: Gradeability

29° @ 55 %

Traveling performance: Max. Tractive Effort

18,298 lb

‍

Weights

Operating Weight

26,224 lb

‍

Dimensions

Bucket Capacity

2.62 yd³

Bucket Width

8′ 4″

Hinge Pin Height

12′ 6″

Dump reach at 45° (fully raised)

3′ 1″

Dump height at 45° (fully raised)

8′ 9″

Overall Height

10′ 9″

Overall Length

23′ 11″

Wheel Base

9′ 6″

Ground Clearance

1′ 5″

External Turning Radius at Bucket Edge

18′ 9″

Static Tipping Load (Straight)

18,827 lb

Static Tipping Load (Full Turn)

16,623 lb

Breakout Force

21,357 lbf

Rear Axle Oscillation

22°

‍

Transmission

Travel Speed Forward – 1st gear

8.08 mph

‍

Refill Capacities

Fuel Tank

48.08 gal

Cooling System

8.06 gal

Hydraulic System

34.34 gal

Hydraulic Tank

34.08 gal

‍

Chubbuck, Pocatello, and Idaho Falls DL200TC-5

‍

We provide the Doosan DL200TC-5 in Idaho Falls, Pocatello, and Chubbuck, which includes a parallel-lift linkage system, allowing you to use a wide variety of common attachments during your next project. You can easily move pipes, pallets, and other materials throughout the work site. This is one machine that can accomplish many tasks, giving you both convenience and efficiency all in one easy-to-operate vehicle.

More height and reach can be accomplished with the Doosan DL200TC-5. You can load and transport materials such as:

• Coal
• Cement
• Grain
• Waste
• Fertilizer
• Scrap
• Debris

These materials can be loaded into hoppers, mixers, and high-sided trucks.

You will also have more visibility down the center of the parallel-lift arms, making it easier to see what you’re doing and increasing the safety of you and those around you. Our Doosan DL200TC-5 in Chubbuck, Pocatello, and Idaho Falls keeps the work tool flat as a result of its parallel-lift linkage system, which can really come in handy when lifting pallets and other materials that have to stay level.

This machine also has dynamic braking – oil flow is automatically reduced when your foot is removed from the travel control pedal, causing it to slow down and putting less wear on the brakes, which means less energy consumption. You can also adjust your maximum travel speed separately from the engine speed; you can get ideal attachment or lift arm performance by selecting one of the seven travel speeds, depending on what’s most appropriate for the job.

Our Idaho Falls, Chubbuck, and Pocatello DL200TC-5 allows you to adjust traction force for a variety of jobsite conditions. Digging, loading, and stockpiling will be far more efficient with reduced wheel slippage. This machine has three traction modes:

• Slip – Ideal for work on slippery surfaces.
• Traction Control – With this option you can choose from three levels for traction reduction, depending on the needs of the job.
• Max – For optimal traction force.

You can return to max traction mode easily – just press the kick-down button located on the directional control lever or the joystick control. You can choose the most appropriate power mode for the work being done. Select from standard mode, power mode, eco mode, and auto idle.

• Standard Mode – This gives you maximum fuel consumption for most common jobs.

• Power Mode – For the most demanding tasks, this mode provides the highest performance level.

• Economy Mode – This mode minimizes fuel consumption for simple load and carry jobs.

• Auto Idle Mode – This keeps fuel use and machine noise to a minimum, allowing for better jobsite communication. This mode also automatically reduces engine RPM to standby idle if the joystick or steering wheel is left untouched for a few seconds.

Our DL200TC-5 in Chubbuck, Pocatello, and Idaho Falls has a cab designed for easier work focus; it has plenty of space, automatic air conditioning, high visibility, and efficiently placed controls. Within the cab you will find a standard color LCD display for monitoring information, seeing maintenance history, and rates of fuel consumption. It also features auto-shutdown for diesel fuel conservation.

Other conveniences include:

• Air suspension seat with right-hand control stand
• Heated mirrors
• A sun visor
• Rearview camera

For your next big project in Pocatello, Chubbuck, or Idaho Falls, DL200TC-5 won’t let you down.

‍